beautypg.com

Sensaphone SCADA 3000 Users manual User Manual

Page 54

background image

6-2

SCADA 3000 User’s Manual

The terminal blocks for wiring the outputs (and inputs) are removable. They should only

be removed or attached when power to the SCADA 3000 is OFF. If for instance you had to

return your SCADA 3000 for service, you could remove the terminal blocks in order to main-

tain your current wiring configuration. To remove terminal blocks use your thumb or forefin-

ger to push the screw section of the block straight out. (See figure below).

Figure 2: Removing terminal blocks