Procedure using cd-rom, Procedure using disks, Updates via internet – Sensaphone SCADA 3000 Users manual User Manual
Page 60
8-2
SCADA 3000 User’s Manual
Procedure using CD-ROm
1. Start Windows.
2. Insert SCADA 3000 CD-ROM
3. Select Start>Run and type in D:\Setup.exe and click OK.
Note: If your CD-ROM is installed on a drive letter other than D, substitute the
appropriate letter.
4. Follow the prompts until the installation is finished.
Updates via internet
Software and Firmware updates will be made available via the Sensaphone.com website under
the Support section. You can also find the latest version of the Owner's Manual as well as
update instructions, additional documents, sample programs, and application notes.
For detailed information on the procedure for installing new firmware, see Appendix F.