Sensaphone SCADA 3000 Users manual - Manual (Page 150)

14-26
SCADA 3000 User’s Manual
Setting Up the Strip Chart
Place the strip chart on the palette and adjust its size accordingly. Expand the DataPoint prop-
erties and assign up to 8 datapoints to the strip chart. Enter names to describe the datapoints
by expanding the DataNames property. Next, change the number-of-data-points property
(NumDataPoints) to match the number of datapoints you have entered above. Edit the title to
describe your strip chart. You can further customize the look of the strip chart by editing the
other strip chart properties based upon your preferences.
Properties
Align (ProgressBar/GaugeLevel): Stretches the bar to align with the top, bottom,
left, right, or client part (fills all) of the palette.
Anchors (ProgressBar/GaugeLevel):
akBottom: Anchors the element a fixed distance from the bottom of the palette.
akLeft: Anchors the element a fixed distance from the left side of the palette.
akRight: Anchors the element a fixed distance from the right side of the palette.
akTop: Anchors the element a fixed distance from the top of the palette.
BackGnd Color: Choose the color of the gauge background. Sets the frame color of
the strip chart.
BackGndMode (GaugeLevel): Choose either Opaque or Transparent background
for the gauge when empty.
Color (GaugeLevel): Color of gauge background if Opaque is selected.
Constraints (Progress Bar/GaugeLevel): Limits the maximum and minimum size of
the bar.
MaxHeight: Sets the maximum height of the bar. (0 disables this property)
MaxWidth: Sets the maximum width of the bar. (0 disables this property)
MinHeight: Sets the minimum height of the bar. (0 disables this property)
MinWidth: Sets the minimum width of the bar. (0 disables this property)
DataColors (Strip chart): Assign a different color to each of up to 8 charted I/O points.
DataFill (Strip chart): Checkbox.
DataNames (Strip chart): Assign a name to each I/O being charted.
Datapoint: Use the submenus to select the I/O (Datapoint), and the unit (SCADA)
being monitored and linked to the gauge.
DataPoints (Strip Chart): Select up to eight I/O points to be charted.
DataType (Strip chart):
DataValue X: Specifies the horizontal location of the data value from -1 to 1.
0=center.
DataValue Y: Specifies the vertical location of the data value from -1 to 1. 0=center.
Display Orientation (for bar gauges): doHorizontal, and doVertical.
Display Percent (GaugeLevel): Displays percent full based on Max and Min values.
Display Value: Checkbox if you want the datapoint value displayed.
FillColor (GaugeLevel): Color of the Container or Vessel when filled.
FillDirection (GaugeLevel): Vertical or Horizontal fill representation.
FillStyle (GaugeLevel): Solid or patterned fill.