Sensaphone SCADA 3000 Users manual - Manual (Page 31)

1-5
Chapter 1: Introduction
Related Publications
Ladder logic programming and C-programming are widely used languages. This manual does
its best to present these topics as they apply to the SCADA 3000; however, there are numerous
texts available which provide extensive information specific to ladder & C-programming.
Each I/O module comes with its own documentation for insertion into this binder. For your
convenience, the documentation for each separate module includes a labeled divider to provide
fast & easy access to that section.
For the latest technical information check our website at www.sensaphone.com
Technical Support
If any questions arise upon installation or operation of the SCADA 3000, please contact
Phonetics Technical Service Department at the number shown below and have the following
information:
•
Date of Purchase ___________________
• Serial Number _____________________ (bottom of unit)
• Firmware version _________/__________ (while on-line, click Diagnostics>Processors)
COMM CONTROL
• PC Software Version _________________ (while running the software, click
Help>About)
Technical Support is available from 8:00 AM to 5:00 PM, EST. You may also e-mail your ques-
tions to [email protected]
Sensaphone.
901 Tryens Road
Aston, PA 19014
Phone: (610)558-2700
Fax: (610)558-0222
www.sensaphone.com
Chapter 1: Introduction