Lenze E82xVxxxKxxxxx - Manual (Page 61)

Mechanical installation
Important notes
5
l
61 EDS82EV903−3.0
5 Mechanical installation
5.1 Important notes
ƒ 8200 vector frequency inverters must only be used as built−in units
ƒ In case of polluted outlet air (dust, fluff, grease, aggressive gases), appropriate
counter measures must be taken (e.g. installation of filters, cleaning at regular
intervals etc.)
ƒ Observe free spaces:
– Multiple devices can be installed side by side with type−dependent free spaces
between them.
– Please ensure unimpeded ventilation of cooling air and outlet air.
– Please observe a free space of 100 mm above and below.
J
Warnings!
The scope of supply of the controller includes a label with the following text:
"Suitable for use on a circuit capable of delivering not more than ...".
If the controller is used in systems in accordance with UL, stick this label on the
controller before mounting. Select the position so that no ventilation hole and
no cooling ribs are covered.