Lenze E82xVxxxKxxxxx - Manual (Page 281)

Function library
Limit value setting
Speed range
10
l
281 EDS82EV903 EN 3.0
10.5 Limit value setting
10.5.1 Speed range
Description
The speed setting range required for the application can be set via the selection of output
frequencies:
ƒ The minimum output frequency (C0010) corresponds to the speed at 0 % speed
setpoint selection.
ƒ The maximum output frequency (C0011) corresponds to the speed at 100 % speed
setpoint selection.
ƒ The lower frequency limitation (C0239) sets the speed. Independently of the
setpoint, the value cannot fall below this speed (e.g. for fans, dancer position
control, or dry running protection for pumps).
0 %
[f]
100 %
C0011
C0010
8200vec526
Fig. 10−5 Relation between setpoint and minimum and maximum output frequency