Lenze E82xVxxxKxxxxx - Manual (Page 171)

Extensions for automation
Standard devices in a power range from 0.25 ... 2.2 kW
Wire and configure standard I/O PT
7
l
171 EDS82EV903 EN 3.0
Dismounting
8200vec607
Fig. 7−4 Worksteps
1. If the communication module is secured by means of a screw
2, loosen it.
2. Unplug the communication module
1 from the AIF interface.
7.1.7 Wire and configure standard I/O PT
)
Note!
Information about the wiring and configuration of the standard I/O is
provided later on in this chapter (
¶ 190).
7.1.8 Wire and configure application I/O PT
)
Note!
Information about the wiring and configuration of the application I/O is
provided later on in this chapter (
¶ 196).