Lenze E82xVxxxKxxxxx Instruction Manuals and User Guides
We have 1 Instruction Manual and User Guide for E82xVxxxKxxxxx Lenze
Manuals 
| Recognized languages: | English |
|---|---|
| Pages: | 548 |
| Size: | 7.53 MB |
Show table of contents
Document Outline
- EDS82EV903
- 8200 vector type code 0.25 ... 11 kW
- 8200 vector type code 15 ... 90 kW
- Contents
- 1 About this documentation
- 2 Product description
- 3 Safety instructions
- 4 Technical data
- 5 Mechanical installation
- 5.1 Important notes
- 5.2 Standard devices in a power range from 0.25 ... 2.2 kW
- 5.3 Standard devices in a power range from 3 ... 11 kW
- 5.4 Standard devices in the power range 15 ... 30 kW
- 5.5 Standard devices with a power of 45 kW
- 5.6 Standard devices with a power of 55 kW
- 5.7 Standard devices in the power range 75 ... 90 kW
- 6 Electrical installation
- 6.1 Important notes
- 6.2 Notes on project planning
- 6.2.1 Supply forms / electrical supply conditions
- 6.2.2 Operation on public supply systems (compliance with EN 61000-3-2)
- 6.2.3 Operation at earth-leakage circuit breaker (e.l.c.b.)
- 6.2.4 Interaction with compensation equipment
- 6.2.5 Discharge current for mobile systems
- 6.2.6 Optimisation of the controller and mains load
- 6.2.7 Reduction of noise emissions
- 6.2.8 Mains choke/mains filter assignment
- 6.2.9 Motor cable
- 6.3 Basics for wiring according to EMC
- 6.4 Standard devices in a power range from 0.25 ... 2.2 kW
- 6.5 Standard devices in a power range from 3 ... 11 kW
- 6.6 Standard devices in the power range 15 ... 30 kW
- 6.7 Standard devices in the power range of 55 kW
- 6.8 Standard devices in the power range 75 ... 90 kW
- 7 Extensions for automation
- 7.1 Standard devices in a power range from 0.25 ... 2.2 kW
- 7.1.1 I/O function modules
- 7.1.2 Bus function modules
- 7.1.3 Communication modules
- 7.1.4 Combine function and communication modules
- 7.1.5 Mounting and dismounting function modules
- 7.1.6 Mounting and dismounting communication modules
- 7.1.7 Wire and configure standard I/O PT
- 7.1.8 Wire and configure application I/O PT
- 7.2 Standard devices in a power range from 3 ... 11 kW
- 7.2.1 I/O function modules
- 7.2.2 Bus function modules
- 7.2.3 Communication modules
- 7.2.4 Combine function and communication modules
- 7.2.5 Mounting and dismounting function modules
- 7.2.6 Mounting and dismounting communication modules
- 7.2.7 Wire and configure standard I/O PT
- 7.2.8 Wire and configure application I/O PT
- 7.2.9 Safety function - connection of relay KSR
- 7.3 Standard devices in a power range from 15 ... 90 kW
- 7.3.1 I/O function modules
- 7.3.2 Bus function modules
- 7.3.3 Communication modules
- 7.3.4 Combine function and communication modules
- 7.3.5 Mounting and dismounting function modules
- 7.3.6 Mounting and dismounting communication modules
- 7.3.7 Wire and configure standard I/O PT
- 7.3.8 Wire and configure application I/O PT
- 7.3.9 Wiring of controller inhibit (CINH) when two function modules are operated
- 7.3.10 Safety function - connection of relay KSR
- 7.4 I/O function module E82ZAFSCO10 (Standard I/O PT)
- 7.5 I/O function module E82ZAFACO10 (application I/O PT)
- 7.1 Standard devices in a power range from 0.25 ... 2.2 kW
- 8 Commissioning
- 9 Parameter setting
- 9.1 Important notes
- 9.2 Parameter setting with E82ZBC keypad
- 9.2.1 General data and operating conditions
- 9.2.2 Installation and commissioning
- 9.2.3 Display elements and function keys
- 9.2.4 Changing and saving parameters
- 9.2.5 Transferring parameters to other standard devices
- 9.2.6 Activating password protection
- 9.2.7 Remote parameter setting for system bus participants
- 9.2.8 Menu structure
- 9.3 Parameter setting with the XT EMZ9371BC keypad
- 9.3.1 General data and operating conditions
- 9.3.2 Installation and commissioning
- 9.3.3 Display elements and function keys
- 9.3.4 Changing and saving parameters
- 9.3.5 Transferring parameters to other standard devices
- 9.3.6 Activating password protection
- 9.3.7 Remote parameter setting for system bus participants
- 9.3.8 Menu structure
- 10 Function library
- 10.1 Important notes
- 10.2 Operating mode
- 10.3 Optimising the operating behaviour
- 10.4 Behaviour in the event of mains switching, mains failure or controller inhibit
- 10.5 Limit value setting
- 10.6 Acceleration, deceleration, braking, stopping
- 10.7 Configuration of analog and digital setpoints and actual values
- 10.7.1 Setpoint source selection
- 10.7.2 Analog setpoints via terminal
- 10.7.3 Digital setpoints via frequency input
- 10.7.4 Setpoints via function "motor potentiometer"
- 10.7.5 Setpoints via fixed setpoints (JOG)
- 10.7.6 Setpoints via keypad
- 10.7.7 Setpoints via a bus system
- 10.7.8 Setpoint changeover (hand/remote changeover)
- 10.8 Automatic detection of motor data
- 10.9 Process controller
- 10.10 Current-limit controller
- 10.11 Free interconnection of analog signals
- 10.12 Free interconnection of digital signals
- 10.13 Thermal motor monitoring
- 10.14 External fault evaluation
- 10.15 Display of operating data, diagnostics
- 10.16 Parameter set management
- 10.17 Individual summary of drive parameters in the user menu
- 10.18 Networking
- 10.19 Code table
- 10.20 Table of attributes
- 10.20.1 Standard devices in a power range from 0.25 ... 11 kW with standard I/O
- 10.20.2 Standard devices in a power range from 0.25 ... 11 kW with application I/O
- 10.20.3 Standard devices in a power range from 15 ... 90 kW with standard I/O
- 10.20.4 Standard devices in a power range from 15 ... 90 kW with application I/O
- 11 Troubleshooting and fault elimination
- 12 DC-bus operation
- 12.1 General information
- 12.2 Functional description
- 12.3 Conditions for trouble-free DC-bus operation
- 12.4 Mains chokes for DC-bus operation
- 12.5 Fuses and cable cross-sections
- 12.6 Basic dimensioning
- 12.7 Central supply (one supply point)
- 12.8 Distributed supply (several supply points)
- 12.9 Braking operation in a drive system
- 13 Braking operation
- 14 Safety engineering
- 15 Application examples
- 16 Signal flow diagrams
- 16.1 Important notes
- 16.2 Signal processing - overview
- 16.2.1 Controller with standard I/O
- 16.2.2 Controller with Standard I/O and communication module
- 16.2.3 Controller with application I/O
- 16.2.4 Controller with Application I/O and communication module
- 16.2.5 Controller with communication module
- 16.2.6 Controller with fieldbus function module
- 16.2.7 Controller with fieldbus function module and communication module
- 16.2.8 Controller with system bus function module
- 16.2.9 Controller with system bus function module and communication module
- 16.3 Signal processing in the function blocks
- 16.3.1 Speed setpoint conditioning (NSET1)
- 16.3.2 Speed setpoint conditioning (NSET1) with Application I/O
- 16.3.3 Process controller and setpoint processing (PCTRL1)
- 16.3.4 Process controller and setpoint processing (PCTRL1) with Application I/O
- 16.3.5 Motor control (MCTRL1)
- 16.3.6 Motor control (MCTRL1) with Application I/O
- 16.3.7 Device control (DCTRL1)
- 16.3.8 Controller state (STAT1, STAT2)
- 16.3.9 Process data of system bus function module (CAN1, CAN2)
- 16.3.10 Process data of fieldbus function module (FIF-IN, FIF-OUT)
- 17 Index