Ag Leader GeoSteer Operation Manual - Manual (Page 97)

Manage Settings
Operator’s Manual 83
Note: The database that is restored onto the unit should come from the same serial number and version of the unit being
restored on. Do not backup one GeoSteer unit and use that database to restore onto a completely different one or restore a
database from a unit with a different version. It is possible that this may cause data corruption.
1. Insert the USB drive with the database to be restored into the Display USB drive.
2. From the System tab, press the Manage Settings button, highlight Database from the list on the left, and then press the
Restore from Display USB button.
3. Press the Choose File button to locate the database to import.
Figure 3-10 Selecting a Database File
4. Navigate to the file that is to be restored on the Disk and select it. Press the Green Check button to select the file. Press
the Red X button to cancel.
Figure 3-11 Select Database File to Restore