Ag Leader GeoSteer Operation Manual - Manual (Page 132)

NTRIP
118 GeoSteer System
Connect
Once a Profile has been created and stored in the list, they can be selected and connected to. Follow the procedure below to
connect to a Profile:
1. From the GPS menu, press the NTRIP button.
2. Press the Blue Up/Down buttons or directly select Profile from the list on the right.
3. Select the desired Profile from the list of profiles on the left.
4. Press the Connect button.
Figure 4-39 Select Profile
5. The system will go back to the General screen and now show the Current Status as Connected.
Figure 4-40 NTRIP Connected