Ag Leader GeoSteer Operation Manual - Manual (Page 57)

Setup Wizard
Operator’s Manual 43
Once the Manual Steering Override setting has been set, press the Blue Right Arrow button to continue to the next step. The
Setup Wizard will automatically start the Auto Calibrate procedure. Refer to the Auto Calibrate section on Page 53 for more
information on these steps.
Autocal
Figure 2-31 Manual Steering Override Auto Calibrate Wizard
The Manual Steering Override Auto Calibrate wizard automatically calibrates the manual steering override value. Start driving
the vehicle forward between 2.0 and 5.0 mph (3.2 and 8.0 kph) with the engine RPM at the working level. Press the Blue Right
Arrow to continue.
Figure 2-32 Auto Calibrate Ready to Start