Ag Leader GeoSteer Operation Manual - Manual (Page 157)

Feature Code
Operator’s Manual 143
Activating a Feature Code
To activate a new Feature Code follow the procedure below:
1. From the My Account menu press the Feature Code button.
2. Use the Gray Up/Down Arrow buttons or directly select an item you wish to activate.
3. Press the Edit button.
4. Enter the Feature Code and press the Green Check button to accept the Feature Code or press the Red X to cancel.
Figure 6-7 Enter the Feature Code Unlock
5. If the code entered is valid, a dialog box appears informing user that the Feature Code has been successfully activated.
Press the Blue Check button to return to the My Account menu.
Figure 6-8 Feature Code Activated
Note: In some cases, the system must be powered down and then restarted after the Feature Code has been activated to take
advantage of the new feature. Always power cycle the system after activating the new Feature Code.