Avaya P330-ML-ML - Manual (Page 97)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 83
The syntax for this command is:
Set mac-aging
Examples:
set mac-aging-time
User level: privileged, supervisor.
L This command is available on the P330-ML-ML switches only.
Use the set mac-aging-time command to set the MAC aging time in minutes.
This is the time after which unused MAC addresses in the MAC table are erased.
The syntax for this command is:
Set mac-aging-time
Example:
L The entered value is the aging time lower limit. The actual aging time might be
up to three minutes longer.
set port auto-negotiation-flowcontrol-advertisement
User level: privileged, supervisor.
Use the set port auto-negotiation-flowcontrol-advertisement
command to set the flowcontrol advertisement for a Gigabit port when performing
autonegotiation.
The syntax for this command is:
set port auto-negotiation-flowcontrol-advertisement
status enable / disable
P330-N# set mac-aging enable
mac aging is enabled.
P330-N# set mac-aging disable
mac aging is disabled.
aging-
time Aging time in minutes (1-3600; default =5).
P330-N# set mac-aging-time 5
mac aging time is set to 5 minutes.