Avaya P330-ML-ML - Manual (Page 62)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
48 Avaya P330-ML Reference Guide
no snmp-server community
User level: supervisor
Use the no snmp-server community command to deny access to the device
using community strings.
The syntax for this command is:
no snmp-server community
Example:
no snmp-server group
User level: supervisor
Use the no snmp-server group command to remove a specified SNMP group.
When a security module is not provided, all instances of the group are removed. If a
security model and level are specified, then only corresponding group instance is
removed
The syntax for this command is:
no snmp-server group {v1 | v2c | v3 {noauth | auth
| priv}}
Example:
P330-N# no snmp-server community
Done!
groupname The name of the SNMP group.
v1 , v2c, v3 The security model to remove from the group.
noauth ,
auth , priv
Keywords that specifies the type of authentication model
instance to remove from the group.
• noauth
• auth
• priv
P330-1(super)# no snmp-server group newgroupG v3 noauth
Done!