Avaya P330-ML-ML - Manual (Page 30)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
16 Avaya P330-ML Reference Guide
The syntax for this command is:
copy module-config scp
Example:
copy module-config tftp
User level: supervisor
Use the copy module-config tftp command to upload the switch-level
parameters from the current NVRAM running configuration into a file via TFTP.
The syntax for this command is:
copy module-config tftp
filename The file name (full path)
ip The IP address of the SCP server
mod-num The switch number
P330-N# copy module-config scp c:\config\switch1.cfg 192.168.49.10 5
Username: 330user
Password:
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'show upload status' command
********************************************************************
* If you are currently running the P330-ML Device Manager
application,*
* it is recommended to exit from it before performing configuration*
* download operations. *
********************************************************************
filename The file name (full path)
ip The IP address of the TFTP server
mod-num The switch number