Avaya P330-ML-ML - Manual (Page 66)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
52 Avaya P330-ML Reference Guide
The syntax for this command is:
no username
Example:
If you wish to delete a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
L You cannot delete the default user account “root”.
nvram initialize
User level: privileged, supervisor.
Use the nvram initialize command to reset the configuration parameters to
their factory defaults.
The syntax for this command is:
nvram initialize {switch | all}
Example:
ping
User level: user, privileged, supervisor
Use the ping command to send ICMP echo request packets to another node on the
network.
L You can use this command via the master switch only.
name User name
P330-1(super)# no username john
User account removed.
switch Resets all the switching parameters (Layer 2 only) throughout
the stack
all Resets all parameters including licenses and routing
parameters of the Layer 3 switches present in the stack
P330-N# nvram initialize
This command will restore factory defaults, and can
disconnect your telnet session
*** Reset *** - do you want to continue (Y/N)? y
Connection closed by foreign host