Avaya P330-ML-ML - Manual (Page 286)

Chapter 3 Avaya P330-ML Layer 3 CLI Commands
270 Avaya P330-ML Reference Guide
show startup-config
User level: user, privileged, supervisor
Use the show startup-config command to show configuration loaded at
startup.
The syntax for this command is:
show startup-config
Example:
show system
User level: user, privileged, supervisor
Use the show system command to display the up time, system name, location,
and contact person.
The syntax for this command is:
show system
Example:
Router-N> show startup-config
! Avaya Inc. P333R Switch - Router configuration
! version 4.0.5
hostname "R1-Backup"
interface "net"
ip vlan name "Default"
ip address 149.49.54.56 255.255.255.0
ip default-gateway 149.49.54.1 1 low
router ospf
Router-N> show system
Uptime d,h:m:s
------------------------
0,2:40:55
System Name System Location System Contact
--------------------- ------------------------- -------------------------
P332_version-3.0.5 Alpha LAB Ygdal Naouri
Switch MAC address
------------------
00 40 0d 8a 04 b4