Avaya P330-ML-ML - Manual (Page 188)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
174 Avaya P330-ML Reference Guide
Example:
show ppp session
User level: user, privileged, supervisor
Use the show ppp session command to display PPP parameters and statistics of
an active PPP session.
The syntax for this command is:
show ppp session
Example:
show protocol
User level: user, privileged, supervisor
Use the show protocol command to display the current state of allowed
protocols on the switch.
The syntax for this command is:
show protocol
Example:
P330-N>show ppp incoming timeout
PPP incoming timeout is 15 minutes
P330-N>show ppp session
P330-N>show protocol
Protocols Status
------------- --------
SSH ON
TELNET-CLIENT OFF
SNMPv1 OFF
SNMPv3 ON
TELNET ON
HTTP OFF
ICMP redirect OFF
recovery-password ON