Avaya P330-ML-ML - Manual (Page 247)

Chapter 3 Avaya P330-ML Layer 3 CLI Commands
Avaya P330-ML Reference Guide 231
Example:
ip access-list-dscp trust
User level: privileged, supervisor.
Use the ip access-list-dscp trust command to decide which original
frame fields influence the selection of packet priority.
L This command does not apply to the P333R.
The syntax for this command is:
ip access-list-dscp trust
{untrusted|trust-cos |trust-dscp}
action = permit | deny | deny-and-notify | fwd0 | fwd1 - fwd7
• permit: do nothing, let the packet pass:
• deny: drop the packet
• deny-and-notify: drop the packet and send an SNMP trap
• fwd0, fwd1fwd7: Set the frame COS field to 0,7
Router-N(configure)# ip access-list-dscp operation 101 0-63
permit
Router-N(configure)# ip access-list-dscp operation 101 62
fwd5
policy-list-
number A valid id number for a policy list currently defined for the module
(100 - 149)
untrusted Forward the packet with priority 0
trust-cos Forward the packet with its original 802.1p priority (default)
trust-dscp Forward the packet with the maximum priority between 802.1p and
the priority obtained from the DSCP-CoS mapping table