Avaya P330-ML-ML - Manual (Page 24)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
10 Avaya P330-ML Reference Guide
clear dynamic vlans
User level: privileged, supervisor.
L This command is available on the P330-ML-ML only.
Use the clear dynamic vlans command to clear dynamically learned VLANs.
Only the VLANs learned by the switch from incoming traffic are cleared using this
command.
The syntax for this command is:
clear dynamic vlans
Example:
clear log
User level: privileged, supervisor.
Use the clear log command to delete the log file of a switch.
The syntax for this command is:
clear log [
Example:
clear logging file
User level: privileged, supervisor.
Use the clear logging file command to delete the log file and open an empty
one.
The syntax for this command is:
clear logging file
P330-N# clear dynamic vlans
This command will delete all the vlans that were
dynamically learned by the device - do you want to continue
(Y/N)? y
Dynamic vlans were deleted from device tables
module
(Optional) Number of switch (1...10)
P330-N# clear log
Cleared all logfiles.