Avaya P330-ML-ML - Manual (Page 209)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 195
The syntax for this command is:
show timezone
Example:
show trunk
User level: user, privileged, supervisor
Use the show trunk command to display VLAN tagging information for the
switch or a specified module or port.
The syntax for this command is:
show trunk [[/-]]
P330-N>show timezone
Timezone set to 'GMT', offset from UTC is 0 hours
mod_num
(Optional) Number of the switch. If you do not specify a number, all
switches in the stack are shown.
port_num
(Optional) Number of the port on the switch. If you do not specify a
number, all ports on the specificity switch are shown.
You can specify a port range.