Avaya P330-ML-ML - Manual (Page 249)

Chapter 3 Avaya P330-ML Layer 3 CLI Commands
Avaya P330-ML Reference Guide 233
Example:
ip bootp-dhcp relay
User level: privileged, supervisor.
L If you are at the ”privileged” level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter configure mode if necessary.
The ip bootp-dhcp command enables relaying of bootp and dhcp requests to the
bootp/dhcp server.
The no ip bootp-dhcp command disables bootp/dhcp relay.
The default state is disabled.
The syntax for this command is:
[no] ip bootp-dhcp relay
Example:
To enable relaying of BOOTP and DHCP requests:
To disable relaying of bootp and dhcp requests:
Router-N(configure)# ip access-list-owner 101 admin
Done!
Router-N(configure)# ip bootp-dhcp relay
Done!
Router-N(configure)# no ip bootp-dhcp relay
Done!