Avaya P330-ML-ML - Manual (Page 311)

Chapter 3 Avaya P330-ML Layer 3 CLI Commands
Avaya P330-ML Reference Guide 295
Example:
timers spf
User level: privileged, supervisor.
Use the timers spf command to configure the delay between runs of OSPF’s
SPF calculation. Use the no form of this command to restore the default (3 seconds).
The syntax for this command is:
[no] timers spf
Example:
Router-N(configure router:ospf)# redistribute static
spf-holdtime The time in seconds of the delay between runs of
OSPF’s SPF calculation.
Router-N(configure router:rip)# timers spf 5
Done!