Avaya P330-ML-ML - Manual (Page 133)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 119
set spantree max-age
User level: privileged, supervisor.
Use the set spantree max-age command to set the bridge spanning tree max
age parameter.
The syntax for this command is:
set spantree max-age
Example:
set spantree priority
User level: privileged, supervisor.
The syntax for this command is:
set spantree priority
Example:
max-age The max age time in seconds to keep message information before it is
discarded. Value ranges between 6 to 40; value must be between 2 X
(Bridge-Hello-Time + 1) and 2 X (Bridge-Forward-Delay - 1).
Recommended value is 20 sec.
P330-N# set spantree max-age 20
bridge max age is set to 20.
number The priority level is from 0 to 61440, with 0 indicating
high priority and 61440 indicating low priority; value should be
in steps of 4096. Default value is 32768.
P330-N# set spantree priority 4096
Bridge priority set to 4096.