Avaya P330-ML-ML - Manual (Page 80)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
66 Avaya P330-ML Reference Guide
Example:
set inband vlan
User level: privileged, supervisor.
Use the set inband vlan command to set the inband management VLAN.
The syntax for this command is:
set inband vlan
Example:
set intelligent-multicast
User level: privileged, supervisor.
Use the set intelligent-multicast command to enable or disable the IP-
multicast filtering application.
The syntax for this command is:
set intelligent-multicast {enable|disable}
Example:
set intelligent-multicast client-port-pruning time
User level: privileged, supervisor.
Use the set intelligent-multicast client port pruning time
command to set the aging time for client ports. This is the time after the P330-ML
switch reset during which the filtering information is learned by the switch but not
configured on the ports.
P330-1(super)# set dot1x tx-period 90
Done!
value Number of the VLAN to be assigned to the management
interface.
P330-N# set inband vlan 1
Management VLAN number set to 1
P330-N# set intelligent-multicast enable
Done!