Avaya P330-ML-ML - Manual (Page 266)

Chapter 3 Avaya P330-ML Layer 3 CLI Commands
250 Avaya P330-ML Reference Guide
show ip access-group
User level: user, privileged, supervisor
Use the show ip access-group command to see information about the
configured active access list.
L This command is available on P330-ML-ML switches only.
The syntax for this command is:
show ip access-group
Example:
show ip access-lists
User level: user, privileged, supervisor
Use the show ip access lists command to display all the current policy lists.
The syntax for this command is:
show ip access-lists[]
Example:
Router-N> show ip access-group
access-group 100
policy-list-number The policy list number (integer from 100 to 149; 0 is
the default list).
Router-N> show ip access-lists
The current policy source is local
default List (0) parameters
List Owner : other
List 0 is valid
default action for list 0 is permit