Avaya P330-ML-ML - Manual (Page 287)

Chapter 3 Avaya P330-ML Layer 3 CLI Commands
Avaya P330-ML Reference Guide 271
show upload status
User level: user, privileged, supervisor
Use the show upload status commands to display the status of the current
configuration file copy process from the device.
The syntax for this command is:
show upload status []
Example:
show vlan
User level: user, privileged, supervisor
Use the show vlan command to display router Layer 3 interfaces.
The syntax for this command is:
show vlan
Example:
terminal
User level: user, privileged, supervisor
Use the terminal width and terminal length commands to set the width
and length of the terminal display in characters.
mod_num
(Optional) Number of the module. If you do not specify a number, upload
statuses for all modules in the stack are shown.
Router-N> show upload status 1
Module : 1
Source file : stack-config
Destination file : c:\conf.cfg
Host : 149.49.36.200
Running state : Executing
Failure display : (null)
Last warning : No-warning
Router-N> show vlan
VLAN NAME VLAN ID VLAN MAC
---------------- ------- -----------------
Default 1 02:e0:3b:1d:f9:01