Avaya P330-ML-ML - Manual (Page 50)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
36 Avaya P330-ML Reference Guide
Example:
hostname
User level: privileged, supervisor.
Use the hostname command to change the Command Line Interface (CLI)
prompt. The current module number always appears at the end of the prompt.
Use the no hostname command to return the CLI prompt to its default.
The syntax for this command is:
[no] hostname []
Examples:
L If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
ip access-list
User level: supervisor
L This command applies to the P334T-ML only when it is in device mode
"Layer2".
Use the ip access list command to create a specific policy rule. The access list
P330-N>help username
Username commands:
----------------------------------------------------------
Usage: username password access-type {read-
only|read-write|admin}
hostname_string • none – displays current hostname
• string – the string to be used as the hostname (up to 20
characters).
P330-N# hostname
Session hostname is ‘P330-ML’
P330-N# hostname “gregory”
gregory-N#
gregory-N# no hostname
P330-N#