Avaya P330-ML-ML - Manual (Page 155)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 141
Example:
show ip access lists
User level: user, privileged, supervisor
Use the show ip access lists command to display all the current policy lists.
L This command applies to the P334T-ML only, when it is in device mode
"Layer2".
The syntax for this command is:
show ip access-lists[]
Example:
P330-N>show ip access-list-dscp 101
Trust configuration is trust-cos
DSCP Action Precedence Name
---- -------------------- ---------- ------------
0 fwd0 mandatory DSCP#0
1 fwd0 mandatory DSCP#1
2 fwd0 mandatory DSCP#2
3 fwd0 mandatory DSCP#3
4 fwd0 mandatory DSCP#4
5 fwd0 mandatory DSCP#5
6 fwd0 mandatory DSCP#6
7 fwd0 mandatory DSCP#7
8 fwd1 mandatory DSCP#8
9 fwd1 mandatory DSCP#9
10 fwd1 mandatory DSCP#10
11 fwd1 mandatory DSCP#11
policy-list-number The policy list number (integer from 100 to 199; 0 is th
default list).
Router-N> show ip access-lists
The current policy source is local
default List (0) parameters
List Owner : other
List 0 is valid
default action for list 0 is permit