Avaya P330-ML-ML - Manual (Page 125)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 111
set radius authentication secret
User level: supervisor
Use the set radius authentication secret command to enable secret
authentication for the P330-ML unit.
The syntax for this command is:
set radius authentication secret
string text password
Example:
set radius authentication server
User level: privileged, supervisor.
Sets the IP address (and shared secret) of the primary or secondary RADIUS
Authentication server.
The syntax for this command is:
set radius authentication server {primary |
secondary}
Example:
set radius authentication udp-port
User level: privileged, supervisor.
Use the set radius authentication udp-port command to set the RFC
2138 approved UDP port number.
Normally, the UDP port number should be set to its default value of 1812. Some
early implementations of the RADIUS server used port number 1645.
P330-1(super)# set radius authentication secret hush
ip-addr IP address of the RADIUS authentication server
primary default - Primary authentication server
secondary Secondary authentication server
P330-1(super)# set radius authentication server
192.40.12.36 primary