Avaya P330-ML-ML - Manual (Page 199)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 185
show snmp retries
User level: user, privileged, supervisor
Use the show snmp retries command to display the number of retries initiated
by the P330-ML Embedded Web Manager when it tries to send SNMP messages to
the device.
The syntax for this command is:
show snmp retries
Example:
show snmp timeout
User level: user, privileged, supervisor
Use the show snmp timeout command to display the default SNMP timeout in
seconds. The SNMP timeout is only for the Avaya P330-ML Embedded Web
Manager.
Tip: This command is useful for access using the Device Manager.
The syntax for this command is:
show snmp timeout
Example:
show snmp user
User level: supervisor
Use then show snmp user command to display command to display SNMP
P330-N>show snmp retries
the SNMP Retries Number is 3
P330-N>show snmp timeout
the SNMP Timeout is 2000