Avaya P330-ML-ML - Manual (Page 143)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 129
Example:
show arp-aging-interval
User level: privileged, supervisor.
Use the show arp-aging-interval command to display the ARP table aging
interval for table entries.
The syntax for this command is:
show arp-aging-interval
Example:
show arp-tx-interval
User level: privileged, supervisor.
Use the show arp-tx-interval command to display the keep-alive frames
transmission interval.
P330-1(super)# show allowed managers table
1 ) 149.49.32.134
2 ) Not Used
3 ) Not Used
4 ) Not Used
5 ) Not Used
6 ) Not Used
7 ) Not Used
8 ) Not Used
9 ) Not Used
10) Not Used
11) Not Used
12) Not Used
13) Not Used
14) Not Used
15) Not Used
16) Not Used
17) Not Used
18) Not Used
19) Not Used
20) Not Used
P330-N>show arp-aging-interval
ARP table aging interval was set to 10 minutes.