Avaya P330-ML-ML - Manual (Page 149)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 135
show device-mode
User level: user, privileged, supervisor
Use the show device-mode command to show the current P330-ML-ML or
P333R operating mode. Possible modes are Router, or Layer 2.
L This command is not available to the P333T, P334T, P332MF and P333T-PWR
switches which do not have Router and to P333R-LB which is always in
Load-Balancing mode.
The syntax for this command is:
show device-mode
Example:
show dot1x
User level: user, privileged, supervisor
Use the show dot1x command to display the system dot1x capabilities, protocol
version, and timer values.
The syntax for this command is:
show dot1x
Example:
show download status
User level: user, privileged, supervisor
L This command applies the P330-ML-ML switches only.
Use the show download status command to display a summary of the last
software download operation.
P330-N>show device mode
Device mode is router
P330-N>show dot1x mode
PAE Capabilities Authenticator Only
Protocol Version 1
system-auth-control disabled
*** Warning : Authentication server ( RADIUS ) is
disabled/not-exist and so,
*** no authentication can be made