Avaya P330-ML-ML - Manual (Page 170)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
156 Avaya P330-ML Reference Guide
Use the show mac-aging command to display the current status of the MAC
aging function.
The syntax for this command is:
show mac-aging
Example:
show mac-aging-time
User level: user, privileged, supervisor
Use the show mac-aging-time command to display the MAC aging time in
minutes.
The syntax for this command is:
show mac-aging-time
Example:
L The displayed value is the aging time lower limit. The actual aging time can be
up to 2 minutes longer.
show module
User level: user, privileged, supervisor
Use the show module command to display switch status and information. For
each switch with an expansion sub-module installed, both switch and expansion
sub-module type and information are shown.
The syntax for this command is:
show module []
P330-N>show mac-aging
mac aging application is disabled
P330-N>show mac-aging-time
MAC aging time is 5 (min.)
mod_num (Optional) Number of the switch/expansion sub-module. If
you do not specify a number, all switches/expansion sub-
modules are shown.