Avaya P330-ML-ML - Manual (Page 168)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
154 Avaya P330-ML Reference Guide
show logging server condition
User level: user, privileged, supervisor
Use the show logging server condition command to display the condition
and filtering of logging to the Syslog server.
The syntax for this command is:
show logging server condition
Example:
ip-address The IP address of the Syslog server. If no IP address is
specified, the condition and filtering of logging to all
configured Syslog servers is displayed.
P330-N>show logging server condition 149.49.38.22
*********************************************************
Message logging configuration of SYSLOG sink ***
Sink Is Enabled
Sink default severity: Warning
Server name: 149.49.38.22
Server facility: local7
Server access level: read-write