Avaya P330-ML-ML - Manual (Page 26)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
12 Avaya P330-ML Reference Guide
clear port static-vlan
User level: privileged, supervisor.
Use the clear port static-vlan command to delete VLANs statically
configured on a port.
The syntax for this command is:
clear port static-vlan [module/port range][vlan num]
Example:
clear radius authentication server
User level: supervisor
Removes a primary or secondary RADIUS authentication server.
The syntax for this command is:
clear radius authentication server[{primary|secondary}]
Example:
clear rmon statistics
User level: privileged, supervisor.
Use the clear rmon statistics command to clear the RMON statistics
counter.
The syntax for this command is:
clear rmon statistics
module/port range Port range
vlan num The VLAN to unbind from the port
P330-N# clear port static-vlan 3/10 5
VLAN 5 is unbound from port 3/10
primary Remove primary RADIUS server
secondary Remove secondary RADIUS server
P330-1(super)# clear radius authentication server secondary