Avaya P330-ML-ML - Manual (Page 84)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
70 Avaya P330-ML Reference Guide
Example:
Example:
set intermodule port redundancy
User level: privileged, supervisor.
Use the set intermodule port redundancy command to define the stack’s
unique intermodule redundancy scheme. The defined scheme can be cleared using
the set intermodule port redundancy off command.
L You must disable Spanning Tree before you can enable intermodule port
redundancy.
The syntax for this command is:
set intermodule port redundancy
{on []}
Example:
L If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, e.g. "new york".
P330-N# set interface ppp enable
Entering the Modem mode within 60 seconds...
Please check that the proprietary modem cable is plugged
into the console port
P330-N# set interface ppp disable
Entering the Terminal mode immediately
module/prim-port Primary port number
module/second-port Secondary port number
on Set the intermodule redundancy
name Name of the fast redundancy (default is
'intermodule')
P330-N# set intermodule port redundancy 1/7 2/12 on
backbone
backbone: port 2/12 is intermodule redundant to port 1/7