Avaya P330-ML-ML - Manual (Page 181)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 167
show port mirror
User level: user, privileged, supervisor
Use the show port mirror command to display mirroring information for the stack.
The syntax for this command is:
show port mirror
Example:
show port point-to-point status
User level: user, privileged, supervisor
Use the show port point-to-point status command to show the port’s
point-to-point admin and operational RSTP status.
The syntax for this command is:
show port point-to-point status
Example:
P330-N>show port mirror
port mirroring
--------------
Mirroring both Rx and Tx packets from port 3/2 to port 4/4
is enabled
P330-N>show port mirror
port mirroring
--------------
No ports are mirrored
module/
port Port identifier
P330-N>show port point-to-point status
Port point-to-point admin state point-to-point oper state
------- ---------------------------- --------------------------
1/1 auto point to point connection
1/2 auto point to point connection
1/3 auto point to point connection
1/4 auto point to point connection
1/5 auto point to point connection
1/6 auto point to point connection
1/7 auto point to point connection