Avaya P330-ML-ML - Manual (Page 103)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 89
Example:
set port dot1x re-authperiod
User level: supervisor
Use the set port dot1x re-authperiod command to set the the idle time
between re-authentication attempts before the session is terminated.
The syntax for this command is:
set port dot1x re-authperiod
Example:
set port dot1x server-timeout
User level: supervisor
Use the set port dot1x server-timeout command to set the time to wait for
a reply from the Authentication Server before the session is terminated.
The syntax for this command is:
set port dot1x server-timeout
Example:
P330-1(super)# set port dot1x re-authentication 1/2 enable
port 1/2 re-authenticate was set to enable
module/
port Module and port number (or range of ports)
seconds Number of seconds – 0 to 65535
P330-1(super)# set port dot1x re-authperiod 1/2 400
module/
port Module and port number (or range of ports)
seconds Number of seconds – 0 to 65535
P330-1(super)# set port dot1x server timeout 1/2 400