Avaya P330-ML-ML - Manual (Page 93)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 79
Example:
set logging server facility
User level: privileged, supervisor.
Use the set logging server facility command to update the server facility
used for sending messages to Syslog server. Facility settings are done on per Syslog
server.
L You need to define a logging server using the set logging server
command before you can set the server facility.
The syntax for this command is:
set logging server facility
P330-N# set logging server enable 149.49.35.21
Done!
server-facility The facility used for sending messages to the Syslog server.
Possible values are:
• kern – Kernel
• user – User processes
• mail – Electronic mail
• daemon – Background system processes
• auth – Authorization
• syslog – System logger
• lpr – Printer
• news – Usenet news
• uucp – Unix-to-Unix copy program
• clkd – Clock daemon
• sec – Security
• ftpd – FTP daemon
• ntp – NTP subsystem
• audi – Log audit
• alert – Log alert
• clkd2 – Clock daemon
• local0-local7 – Available for user defined facilities
ip-address The IP address of the Syslog server.