Avaya P330-ML-ML - Manual (Page 236)

Chapter 3 Avaya P330-ML Layer 3 CLI Commands
220 Avaya P330-ML Reference Guide
copy scp startup-config
User level: privileged, supervisor.
Use the copy scp startup-config command to download a startup
configuration to the device via SCP.
L Only parameters that differ from the factory default settings for the switch are
included in the configuration file. Therefore, it is important to reinitialize the
NVRAM to the factory default settings before downloading configuration files
to the switch. To reinitialize the NVRAM, run the nvram initialize
command.
The syntax for this command is:
copy scp startup-config
Example (for Windows):
Example: (for Unix):
copy startup-config scp
Use the copy startup-config scp command to upload the switch-level
startup configuration from the active bank into a file via SCP.
The syntax for this command is:
copy startup-config scp
filename Source file name on the SCP server (full path).
ip The ip address of the SCP server.
P330-N# copy scp startup-config c:\P330-ML\startup.cfg
149.49.100.41
P330-N# copy scp startup-config /folder/P330-ML/
startup.cfg 149.49.100.41
filename The file name (full path)
ip The IP address of the SCP server
mod-num The switch number