Avaya P330-ML-ML - Manual (Page 179)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 165
show port edge state
User level: user, privileged, supervisor
Use the show port edge state command to show a port’s edge admin and
operational RSTP state.
L A port can be set to admin state of edge port, but if a BPDU is received on this
port the oper state is changed to non-edge state.
The syntax for this command is:
show port edge state
Example:
show port flowcontrol
User level: user, privileged, supervisor
Use the show port flowcontrol command to display per-port status
information related to flow control.
The syntax for this command is:
show port flowcontrol [[/]]
Example:
module/
port Port identifier
P330-N>show port edge state
Port admin state oper state
------- ------------- -------------
1/1 edge-port edge-port
1/2 non-edge-port non-edge-port
module
(Optional) Number of the switch . If you do not specify a number, all
switches are shown.
port
(Optional) Number of the port on the switch. If you do not specify a
number, all ports on the specified switch are shown.
P330-N>show port flowcontrol 3/4
Port Send-Flowcontrol Receive-Flowcontrol
Admin Oper Admin Oper
------ ----- ---- ----- ----
3/4 off off off off