Avaya P330-ML-ML - Manual (Page 203)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 189
Output fields:
show spantree
User level: user, privileged, supervisor
Use then show spantree command to display spanning-tree information.
The syntax for this command is:
show spantree [[/]]
Field Description
View Name The name of the view.
Subtree Oid The name of a MIB subtree in OID format or as a textname
mapped to a valid OID.
Subtree Mask The subtree mask. This can be all ones, all zeros, or a
combination of both.
View Type Status of whether the MIB subtree is included or excluded.
Storage Type The type of storage used to store the view configuration.
Possible values are:
• nonVolatile – The configuration is saved in non-volatile
memory and is retained after the stack is reset.
• Volatile – The configuration is saved in volatile memory and
is not retained when the stack is reset.
mod_num
(Optional) Number of the switch. If you do not specify a number, all
switches are shown.
port
(Optional) Number of the port on the switch. If you do not specify a
number, all ports on the specified switch are shown.