Avaya P330-ML-ML - Manual (Page 190)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
176 Avaya P330-ML Reference Guide
show rmon alarm
User level: user, privileged, supervisor
Use the show rmon alarm command to display the parameters set for a specific
alarm entry that was set using the rmon alarm command on or using the P330-ML
Manager.
The syntax for this command is:
show rmon alarm []
Example:
Alarm Index History index defined using rmon alarm command or the
P330-ML Manager.
P330-N>show rmon alarm 1026
alarm
alarm 1026 is active, owned by amir
Monitors ifEntry.1.1026 every 60 seconds
Taking delta samples, last value was 1712
Rising threshold is 10000, assigned to event # 1054
Falling threshold is 10, assigned to event # 1054
On startup enable rising or_falling alarms.