Avaya P330-ML-ML - Manual (Page 146)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
132 Avaya P330-ML Reference Guide
Example: (by Module/Port)
show cam mac
User level: user, privileged, supervisor
Use the show cam mac command to display the module and port number where
a specific MAC address was learned.
L MACs associated with LAGs appear under the LAG ID, not under the LAG
port.
The syntax for this command is:
show cam mac
Example:
show cam vlan
User level: user, privileged, supervisor
Use the show cam vlan command to display the MAC addresses learned on a
specific VLAN. The MAC addresses are displayed with their destination module
and port number.
L MACs associated with LAGs appear under the LAG ID, not under the LAG
port.
P330-N>show cam 1/1
show cam 1/1
Dest MAC/Route Dest Destination Ports
------------------- -----------------
00-40-0d-59-03-78 1/1
00-d0-79-0a-0a-da 1/1
00-40-0d-43-1e-e9 1/1
...
00-40-0d-c6-24-01 1/1
Total Matching CAM Entries Displayed = 178
mac-addr MAC address to search for.
P330-N# show cam mac 00-00-81-01-23-45
Dest MAC/Route Dest Destination Ports VLAN
------------------- ----------------- ----
00-a0-cc-66-4e-52 1/8 1
Total Matching CAM Entries Displayed = 1