Avaya P330-ML-ML - Manual (Page 134)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
120 Avaya P330-ML Reference Guide
set spantree tx-hold-count
User level: privileged, supervisor.
Use the set spantree tx-hold-count command to limit the maximum
number of BPDUs transmitted during a hello-time period.
The syntax for this command is:
set spantree tx-hold-count
Example:
set spantree version
User level: privileged, supervisor.
Use the set spantree version command to set the rapid spanning tree state
machine to work as "STP compatible".
The syntax for this command is:
set spantree version
Example:
rate Value between 1 to 10; recommended value is 3
P330-N# set spantree tx-hold-count 3
tx hold count is set to 3.
version common-spanning-tree — compatible with ieee802.1D standard.
rapid-spanning-tree — compatible with ieee802.1W standard
P330-N# set spantree version rapid-spanning-tree
Spanning tree version is set to rapid spanning tree.