Show policy type – Avaya P330-ML-ML User Manual
Page 284
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
268
Avaya P330-ML Reference Guide
Example:
show policy type
User level: user, privileged, supervisor
L This command is available on the P334T-ML only.
Router-N> show ip vrrp detail
VRRP is globally enabled
Virtual Router on VLAN:
1
Router-id:
1
State:
MASTER
Priority:
255
Advertisement Interval:
1
Last State Change:
00:00:00
Override Address Ownership Rule: No
Authentication Type:
None
Authentication Key:
""
Master IP Address
192.168.66.23
Has 1 IP addresses
IP addresses:
192.168.66.23
Primary IP Address:
192.168.66.23
Primary IP Address was chosen by default
Preemption Mode: enabled
# of times Master: 2
# of received Advertisements: 0
# of transmitted Advertisements: 20
# of received Advertisements with Security Violations: 0
Virtual Router on VLAN: 1
Router-id: 2
State: BACKUP
Priority: 100
Advertisement Interval: 1
Last State Change: 00:00:00
Override Address Ownership Rule: No
Authentication Type: None
Authentication Key: ""
Master IP Address 0.0.0.0
Has 1 IP addresses
IP addresses:
192.168.66.24
Primary IP Address: 192.168.66.23
Primary IP Address was chosen by default
Preemption Mode: enabled
# of times Master: 1
# of received Advertisements: 0
# of transmitted Advertisements: 13
# of received Advertisements with Security Violations: 0
Router-N>