Avaya P330-ML-ML - Manual (Page 293)

Chapter 3 Avaya P330-ML Layer 3 CLI Commands
Avaya P330-ML Reference Guide 277
Example:
To add station 192.168.37.46 as a bootp/dhcp server to handle bootp/dhcp requests
arriving at the interface “marketing”:
ip broadcast-address
User level: privileged, supervisor.
Use the ip broadcast command to update the interface broadcast address. The
Broadcast address must be filled in with 0s (zeros) or 1s (ones).
The syntax for this command is:
ip broadcast-address
Example:
ip directed-broadcast
User level: privileged, supervisor.
Use the ip directed-broadcast command to enable net-directed broadcast
forwarding.
Use the no ip directed-broadcast command to disables net-directed
broadcasts on an interface.
The syntax for this command is:
[no] ip directed-broadcast
Example:
Router-N(configure-if:marketing) # ip bootp-dhcp server
192.168.37.46
Done!
bc addr The broadcast IP address
Router-N(config-if:marketing)#ip broadcast address
192.168.255.255
Router-N(config-if:marketing)# ip directed broadcast