Avaya P330-ML-ML - Manual (Page 233)

Chapter 3 Avaya P330-ML Layer 3 CLI Commands
Avaya P330-ML Reference Guide 217
copy module-config tftp
Use the copy module-config tftp command to upload the switch-level
parameters from the current NVRAM running configuration into a file via TFTP.
The syntax for this command is:
copy module-config tftp
Example:
copy running-config scp
Use the copy running-config scp command to upload the current
switch-level parameters from the current NVRAM running configuration into a file
via SCP.
The syntax for this command is:
copy running-config scp
filename The file name (full path)
ip The IP address of the TFTP server
mod-num The switch number
P330-N# copy module-config tftp c:\config\switch1.cfg 192.168.49.10 5
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'show tftp upload status' command
********************************************************************
* If you are currently running the P330-ML Device Manager
application,*
* it is recommended to exit from it before performing configuration*
* download operations. *
********************************************************************
filename The file name (full path)
ip The IP address of the SCP server
mod-num The switch number