Avaya P330-ML-ML - Manual (Page 23)

Avaya P330-ML Reference Guide 9
Chapter 2
Avaya P330-ML Layer 2 CLI Commands
This chapter describes all the P330-ML Layer 2 CLI commands and parameters in
alphabetical order.
clear cam
User level: privileged, supervisor.
Use the clear cam command to delete all entries from the CAM table.
The syntax for this command is:
clear cam
Example:
clear dot1x config
User level: supervisor
Use the clear dot1x config command to disable dot1x on all ports and return
values to the default settings..
The syntax for this command is:
clear dot1x config
Example:
P330-N# clear cam
CAM table cleared.
P330-N# clear dot1x config
Original Configuration was Restored